null ua-61761992-1
Skip to main content
Your Cart

Toyota High-Capacity Adjustable Wheelbase THDA25/35

Toyota High-Capacity Adjustable Wheelbase THDA25/35

The Toyota Industrial Equipment High-Capacity Forklift with Adjustable Wheelbase is a master of flexibility. This sit down counterbalanced forklift allows operators to make adjustments to varying load weights with an extendable counterweight that includes removable slabs. Need to move a big, awkward item? The multi-stage telescopic boom is able to safely and efficiently move large equipment such as industrial machinery or massive engines.

 

  • Electrical horn
  • Asbestos-free components
  • Bolt-on overhead guard
  • Operator Restraint System seat
  • Spring-applied/hydraulic release parking brake
  • Orange forks
  • Operator Presence Sensing System (OPSS)
  • PERFORMANCE
  • PSI 3.0L 4-cylinder engine (LP/Gas)1
  • PSI 4.3L V6 engine (LP/Gas)2
  • 2-Speed hydrostatic transmission
  • Hydraulic machinery boom & stand3
  • 2-function hydraulic control valve (lift/tilt)
  • Full hydraulic power steering
  • Heavy-duty alternator with builtin regulator
  • Inboard muffler
  • 7” touch-screen multi-function display
  • - Fuel gauge
  • - Hour meter
  • - Speedometer
  • - Tachometer
  • - Water temperature gauge
  • - Estimated capacity calculator
  • - Engine oil pressure
  • - Parking brake indicator
  • - Estimated load weight indicator
  • - Service and operator manuals
  • - Pre-operation checklist (upon request)4
  • - Fuse/relay diagnostics
  • DURABILITY
  • Impact-resistant main and side thrust rollers to reduce friction
  • Greaseable mast pivots constructed with wear-resistant bronze bushings and hardened steel pins
  • Chrome-plated cylinder rods
  • Built-in engine protection system
  • Heavy-duty isolated anti-vibration bolt-in drive line mounts
  • Tilt-lock counterbalance valve to prevent mast drift
  • 12 volt electrical system
  • Heavy duty planetary drive rated for durability in high-capacity applications
  • Double reduction gearing for increased torque
  • Precision ground, heat-treated gears
  • Thick top plate on welded beam steer axle provides added strength
  • Dual-action bolt-on cylinder protected by heavy steel support beams
  • High-impact composite trunnions
  • Tapered roller bearings
  • Two-part rust-inhibiting polyurethane base coat and two-part polyurethane top
    coat for corrosion protection
  • Powder-coated components
  • ERGONOMICS
  • Left-hand operator/seat position
  • Rubber-mounted cab isolated from the frame to reduce noise and vibration
  • Low-height, non-skid steps
  • Adjustable semi-suspension seat
  • Soft-touch hydraulic levers
  • Tilt steering column
  • Hydraulic weight scale
  • Large dual operator assist grips
  • SERVICEABILITY
  • Quick-Change Fork System for quick connect/disconnect of forks and boom
  • Engine fault code diagnostic capability
  • Externally mounted charge pump and integral filter allow for easy maintenance
  • O-ring face seal fittings
  • Easy-access oil filter and drain
  • Large clean-out covers on top of hydraulic tank and convenient drain plug on the bottom
  • Electric radiator fan with automated reversing feature
  • Hydraulic multi-gauge
  • Wires enclosed in split tube wire loom wrap
  • Sealed weatherpack connectors
  • Easy-access steer axle lubrication points
  • Hinged panels and hoods supported by gas shocks to reach entire drivetrain, hydraulics, and filters

MASTS

  • Wide Visible Mast (V)1
  • Full-Free Lift Two-Stage Mast (FV)
  • Full-Free Lift Three-Stage Mast (FSV)1
  • CARRIAGE
  • Integral Side Shifting Fork Positioner (Dependent)
  • Integral Fork Positioner (Independent)
  • Hang-On Side Shifting Fork Positioner (Dependent)
  • Integral Side Shifter, Pin Type
  • Hang-on Fork Positioner (Independent)1
  • Hang-on Side Shifter1
  • Standard Tapered Forks
  • Fully-Tapered Forks
  • BOOM
  • Hydraulic Machinery Boom and Stand1
  • Fork Mounted Boom1
  • Less Machinery Boom and Stand
  • Lifting Ring Assembly (2nd Position Lift Point)
  • Boom Shackle
  • Boom Shackle and Hook
  • Jaw and Hook Swivel w/ Thrust Bearing
  • CHASSIS
  • Special Paint (One Color)2
  • SEATS & SEATBELTS
  • Air Ride Seat
  • STEERING & OPERATION
  • Traction Control
  • LIGHTS
  • Amber Strobe Light
  • Forward Facing Blue Light (Key Switch Activated)
  • Rear Facing Blue Light (Key Switch Activated)
  • Extra Work Lights- LED Forward
  • Facing (pair)
  • INDICATORS & MISC.
  • Backup Alarm
  • Rear Camera System Visibility Aid
  • Fire Extinguisher (5 lb)
  • Remote Control
Model:THDA25/35, Tire Type: Cushion
Featured Attribute:High-Capacity, Power/ Fuel Type:LP/Gas, Horsepower (hp):80, Max Capacity (lbs.):25000, Lift Speed Loaded (fpm):N/A, Max Gradeability Loaded (%): N/A, Basic Right Angle Stack (in.): 140/173, Length to Fork Face (in.):129/175, Overall Height Collapsed (in.):95, Overall Width (in.):60, Overall Length (n.): N/A, Lift Height (in.):264, Turn Radius Outside (deg/in): 114,Turn Radius Inside (deg/in): N/A, Wheelbase (in.): 76/112
Model:THDA25/35

Featured Information

Product Badge:
Forklifts
Price Link:
Request a Quote
Phone:
(847) 678-3450
Condition:
New
All Locations:
true
Location:
Elk Grove Village, IL
Location:
Bedford Park, IL
Location:
Batavia, IL
Location:
Brooklyn Park, MN
Location:
Byron, MN
Specification Tab:
true
Operational Tab:
true
Promotions:
true
Financing:
https://www.commercialcreditapps.com/BusinessIQ/credec/caps/pla/loadAppInternalPLAPage?addEditFlag=A&appTemplateId=dZwGGY%2ByrR7r%2B0FeNDXmlw%3D%3D&appTemplateToken=2710
Featured Info:
true
Inventory Form:
true
Featured Attributes Tab:
true
Power Source:
Gas/LP
Manufacturer:
Toyota
Featured Attribute:
High-Capacity
Tire Type:
Cushion
Brochure:
https://atlastoyota.com/asset/61ddd2c15a06a
SKU:
THDA25/35
Condition:
New

Specifications and Operational Information

Condition
New
Manufacturer
Toyota

Current Promotions

Apply For Financing

Download and Print Brochure

Available at These Locations