2017 Toyota Stand-Up Rider Forklift 8BNCU20/21.5-T43034

• 36-Volt electrical system
• AC induction drive motor
• AC transistor control system with MOSFET
• AC induction lift motor
• Independent lift, steer & auxiliary motors
• Dual rubber steer tires (8BNCU15 only)
• Dual polyurethane steer tires (8BNCU18-20 only)
• Low durometer smooth rubber drive tires
• Programmable performance parameters
• Multifunction digital display
• Power hookup for onboard terminal (10 amp)
• UL-approved model type “E”
• Mast tilt (3° forward/5° backward)
• OPERABILITY
• Multifunction control handle (single-axis, simultaneous function)
• Hydrostatic power steering
• Auto-off system
• Cornering speed control
• Ventilated tractor compartment
• Auto position hold (drive motor/brake hold)
• Anti-stall protection
• Two-post overhead guard
• High-visibility mast & overhead guard
• Dual electric disc brakes (self-adjusting)
• Regenerative braking
• Proportional plugging
• 48" load backrest extension
• Hydraulic mast cushioning
• ERGONOMICS
• Shock-dampened, isolated operator compartment floor
• Spacious operator compartment
• Flexible side stance operator compartment
• 7/8"-thick bubble-cushioned floor mat
• Ergonomically sloped floorboard
• Cushioned padded backrest & armrest
• Low-effort brake pedal
• Low step height
• Integrated clipboard, amenity tray & cup holder
• SERVICEABILITY
• One-piece top cover
• Self-diagnostics (with instructional messages)
• Built-in analyzer
• Fault code memory
• Programmable maintenance indicator
• Battery compartment rollers (corrosion resistant)
• Battery retaining gates
• Vertically mounted motors
• Anti-static ground strap
• Reverse polarity protection
• Flashware enabled software
• SB 350 battery connector (gray)
• No directional contactors
• Multifunction hour meter
• Battery discharge indicator (with lift interrupt)
• Maintenance indicator
• Temperature indicator
• LOAD HANDLING
• Full free-lift 2-stage mast (FV)
• Full free-lift 3-stage mast (FSV)
• Full free-lift 4-stage mast (QFV)
• Integral sideshift (Lift-Tek)2, 15
• Mast tilt centering (two-way)15
• Hydraulic quick disconnects (single 15 & dual 15)
• LOAD HANDLING (HOSE & VALVE ASSEMBLY)
  WITH SIDESHIFT
• Integral sideshift (Lift-Tek) with one auxiliary function (internal reeving)2, 15 WITHOUT SIDESHIFT
• One auxiliary function (fixed carriage only) (internal reeving)15
• Two auxiliary functions (fixed carriage only) (internal reeving)15
• LIGHTS & INDICATORS
• Travel alarm (back up only or forward only)
• Travel alarm (forward & back up)
• Fire extinguisher 2.5 lb. dry chemical
• Warning strobe light, top or bottom mounted (amber or red)
• LED work lights (mast mounted)
• LED rear work light
• LED operator compartment light
• Operator compartment fan
• 12-Volt power supply (9 amp)
• Multi-position pillar-mounted clipboard
• Electronic key (operator pin code entry)
• Capacity plate for field-installed attachments
• BODY
• Load backrest, optional height (30," 36," 42")
• Load backrest, optional height (54," 60" requires downrating)3
• Factory pre-programmed maximum travel speed (5 mph)
• Travel speed reduction above free-lift4
• Digital load weight display4
• Lift limit switch with bypass5-6
• Keyless on/off switch (in lieu of key switch)
• OHG: intermediate height 83"
• OHG: intermediate height 84" – 93"
• Mast tilt (5° forward/3° backward)7
• Bottler’s mast tilt (10° forward/3° backward)6, 7, 15
• Extended operator compartment backrest
• Compartment sensor system (CSS)
• Hinged rear operator guard (full length)15
• Battery side gate interlock switches (travel cut-out)
• Battery compartment spacer – 16.5" wide
• (non-weighted) (8BNCU15-18 only)3, 8-9
• Battery compartment spacer – 16.5" wide (weighted: 340 lbs.) (8BNCU15-18 only)9-10
• Battery compartment spacer – 13.75" wide (non-weighted) (8BNCU15-18 only)3, 8-9, 15
• Battery compartment spacer – 13.75" wide (weighted: 700 lbs.) (8BNCU15-18 only)9-10
• Dual battery connector configuration for fast charge system (without cabling &
  connectors)11
• Battery connector (red, blue or yellow)
• FORK
• STANDARD TAPERED
• Fork lengths (4" wide x 1.5" thickness) – 30," 36," 42," 48," 54," 60"
• Forks – delete from truck
• FULLY TAPERED & POLISHED
• Fork lengths (4" wide x 1.5" thickness) – 30," 36," 42," 48," 54," 60"
• WHEELS & TIRES
• Polyurethane drive (black), 83 durometer (16.25" x 11.25" x 6")
• Polyurethane drive (black), 83 durometer (16.25" x 11.25" x 7")
• Non-marking rubber drive (white), 65 durometer (16.25" x 11.25" x 6")
• Non-marking rubber drive (white), 65 durometer (16.25" x 11.25" x 7")
• Traction rubber drive (black), 64 durometer (16.25" x 11.25" x 6")
• Traction rubber drive (black), 64 durometer (16.25" x 11.25" x 7")
• Razor siped polyurethane drive (red), 83 durometer (16.25" x 11.25" x 6")
• Razor siped polyurethane drive (red), 83 durometer (16.25" x 11.25" x 7")
• Dual rubber steer (black), 72 durometer
• Dual polyurethane steer (tan), 95 durometer
• Dual polyurethane steer (red), 85 durometer
• SPECIAL MODEL
• Cold storage conditioning12-13, 15
• UL-approved model type “EE”14, 15
• Reverse steering

Model:8BNCU20/21.5, Tire Type: Cushion

Featured Attribute:Electric, Power/ Fuel Type:Battery, Electrical System Voltage: 80, Horsepower (hp):N/A, Max Capacity (lbs.):5000, Max Travel Speed Empty (mph):12.4, Max Travel Speed Loaded (mph): 11.8, Lift Speed Loaded (fpm):91, Max Gradeability Loaded (%): 25/29, Basic Right Angle Stack (in.): 95.4, Length to Fork Face (in.):89.9, Overall Height Collapsed (in.):88, Overall Width (in.):47, Overall Length (n.): N/A, Lift Height (in.):179.5, Turn Radius Outside (deg/in): 78.9,Turn Radius Inside (deg/in): 58.1, Wheelbase (in.): 62

Model:8BNCU20/21.5