Genie 186' Extra-Capacity Boom Lift SX-180 XC
| The highest reaching model in the line-up, the Genie® SX™-180 telescopic boom is built to safely and quickly lift operators. It is purpose-built to work on jobsites in the oil and gas industries and in commercial construction, industrial construction and maintenance, and general maintenance applications. Tackles the most extreme jobs with a vertical reach of 180 ft (54.9 m) and horizontal reach of 80 ft (24.4 m) Easily position workers and gear with a 10 ft (3.05 m) rotating jib Genie XChassis™ extends and retracts to provide stability on the job and a narrow profile for transport Standard 8 ft (2.44 m) self-leveling platform with an unrestricted capacity of 750 lb (340 kg) |
- Measurements
- 186 ft (57 m) working height
- 80 ft (24.4 m) horizontal reach
- 750 lb (340 kg) lift capacity
- Productivity
- XChassis™ extendable axles
- 10 ft (3.05 m) 60° rotating jib
- Self-leveling platform
- 160° hydraulic platform rotation
- Proportional joystick controls
- Hydraulic oil cooler
- Drive enable
- AC power in the platform
- Horn
- Hour meter
- Tilt alarm
- Descent alarm
- 360° continuous turntable rotation
- Positive traction 4WD
- Two speed wheel motors
- Four wheel high angle steer
- Four steering modes: front, rear, crab and coordinated
- On board full diagnostics and engine monitoring display
- Lift Tools™ Work Tray
- Entry Toeboard
- Lift Connect™ Telematics
- Lift Guard™ Contact Alarm
- Power
- 7.5 kW welder ready generator
- 208V/120V/60Hz (North America)
- 415V/240V/50Hz (Europe & Australia)
- 110V/55V/50Hz (UK)
- 12 V DC auxiliary power
- Auto engine fault protection
- Swing out engine tray
- Productivity Options
- Lift Guard Platform Mesh - Half
- Lift Guard Platform Mesh - Full
- Welder package
- Welder Ready package
- Cold weather, fire resistant, or biodegradable hydraulic oil
- Hostile environment kit
- Deluxe hostile environment kit
- Thumb rocker steer
- Light package
- Entry toe boards
- Pipe cradle (pair)
- Alarm package**
- Panel cradle package
- Lockable platform control box cover
- Operator Protective Structure**
- Fall Arrest Bar
- Power Options
- 12.5 kW welder ready AC generator
- 208V/110V/60Hz
- Cold weather kit
- Diesel scrubber/catalytic muffler
- Intake air pre-cleaner
- Positive air shutoff system (Deutz engine only)
Model:SX-180 XC, Work Height (in.): 186'
Featured Attribute:Telescopic, Fuel Type:Diesel, Raised Platform Height (ft.): 180', Lowered Platform Height (ft.):10', Overall Width (in.):8' 2", Overall Length (in.):53' 1", Platform Capacity at Lift Height (lb) (in.) : 750, Platform Lift Time (sec):N/A, Platform Lower Time (sec): N/A, Ground Clearance (Collapsed) (in.): 1' 3", Ground Clearance (Lifted) (in.):N/A, Wheelbase (in.):16' 6", Max Travel Speed (Lowered) (mph):2.3, Max Travel Speed (Lifted) (mph): below 125 ft-0.4, Max Gradeability (%):35%, Turn Radius Inside (deg): 20' 7",Turn Radius Outside (deg): 28' 1", Number of Mast Stages: N/A, Electrical Voltage: N/A, Max Drive Height: N/A
Model:SX-180 XC